1. Identify your receiver type before you order. Use the photos and descriptions posted below.

  2. NEW RECEIVER TYPES ADDED.

  3. Make sure to scroll all the way down to view recently added models.

ProductsIWDproducts.html
HomeIWDHome.html
TechIWDTech.html
WoodpileIWDwoodpile.html
OrderIWDOrder.html
ContactIWDContact.html

Romanian/Eastern European stamped receiver

  1. •Straight cut end, ( nearly right angle from top of receiver )

  2. •Romanian: WUM, WASR, SAR, PSL, ROMAK models

  3. •Hungarian: SA-85, SA-85 M,

  4. •Egyptian: Maadi (ARM & RML), MISR, MISR ( 10 & 90)

  5. •Bulgarian: any stamped receiver model, most likely US made

  6. •Saiga: for “converted” sporter rifle/shotguns

  7. •US Made: most US made stamped receivers are based on

traditional Romanian type stamped receivers      

Chinese MAK 90 stamped receiver

  1. •Straight cut end, ( nearly right angle from top of receiver )

  2. •Nearly identical to Romanian, but with different internal tolerances

  and longer tang length

Chinese MAK milled angle cut receiver

  1. •Angle cut end, with hole in rear

  2. •Originally, these were traditional 2 tang receivers, cut so they would not accept any existing military butt stock, we fixed that!

  3. •We pre-fit MAK Milled butt stocks, but, fitting may be required.

Bulgarian Single tang milled receiver

  1. •Single tang end

  2. •Rounded rectangular opening at rear

  3. •Originally a 2 tang model. Lower tang removed so thumbhole post-ban stock could fit.

  4. •Requires special mounting bolt & lug

(Included with our 1 Tang Bulgarian sets)

Romanian PSL type radius cut stamped receiver

  1. •Radius cut to accept PSL thumbhole type butt stock

  2. •Found on both FPK model, (sniper PSL, with long hand guards

  and on PSL models with standard length AK hand guards.

Traditional milled 2 tang receiver

  1. •Bulgarian milled ( 2 tang )

  2. •Polytech legend ( 2 tang )

  3. •Polish milled ( 2 tang )

Yugoslavian stamped receivers

  1. •M70

  2. •M90/98

  3. •M72 RPK

  4. •M76 sniper variant

  5. •Rounded rectangular end with 8mm threaded hole

Yugoslavian M64 milled 2 tang receiver

Ak Receivers

Chinese MAK stamped angle cut receiver

  1. •Double angle cut at rear of receiver

  2. •Basically a cut version of the receiver shown above.

  3. •These receiver types were not a factory original item, but a modified standard receiver, made to fit the sporter thumbhole post-ban imports.

  4. •Tolerances can vary regarding the angle cut portion of the receiver. In most cases, our stocks will mate up well with the receiver. Fitting may be required.

Ironwood Designs