YUGOSLAVIAN 3 & 4 PC. SETS

  1. M70 M90 M64 M72 RPK

  2. M70/Tabuk Sniper

  3. M76 Sniper

MILLED RECEIVER STOCK SETS

  1. Bulgarian 1 & 2 Tang

  2. Chinese MAK 1 Tang

  3. Chinese 2 Tang Poly-tech

  4. Czechoslovakian VZ58

  5. Polish Model 1960

PISTOL GRIP HAND GUARD SETS

  1. All 3 pc. Sets

HAND GUARD SETS

  1. All 2 pc. Sets

INDIVIDUAL PARTS

  1. Butt Stocks & Pistol Grips

  2. Upper & Lower Hand Guards

AR-15 STOCK SETS

  1. A1 FULL, MID & CAR

  2. A2 FULL, MID & CAR

AR-15 INDIVIDUAL STOCK PARTS

  1. All AR-15 Individual Parts

CUSTOM STOCK PRODUCTS

  1. STG-47

Product Categories

Sets listed on this page fit Yugoslavian AK-47 receivers.

Including the following models:

  1. M70, M90, M72, M70, Tabuk& M76 models

  2. M64


PAP SERBIAN variant info posted at bottom of page

Example of Beech

$195 + $13 S&H

M70 4 Piece Set Features:

  1. Standard M70 butt stock (mounting bolt not included)

  2. Accepts original M70 recoil pad

  3. Standard Yugo M70 lower hand guard

    (accepts original M70 lower rear support cap)

    (cleaning rod hole drilled)

  1. Standard Yugo M70 upper hand guard

  2. Scaled down M76 Yugo pistol grip

    (We are out of the grip caps until we can find a new source)


M90 4 piece set:

  1. Same as M70 set, except comes with M90 specific

   lower hand guard. (accepts original M90 lower rear cap)

   (no cleaning rod hole, like original M90 lower)

M70 set   Part # M70-4

M90 set   Part # M90-4

list wood type when ordering.


Yugoslavian stock sets

M70 4pc. set

Ask about Afromosia, “African Teak”, our new replacement wood for Teak.

Options/Upgrades & Wood Types

(all parts shown in random wood types)

PISTOL GRIP UPGRADES

Part #LHG-M70-B  $20

HAND GUARD UPGRADES

Part #RP  $15

BUTT STOCK OPTIONS

All Yugo M70, M90, M72 M76, M64 & M70 Tabuk butt stocks are cut to fit original M70 recoil pads, as shown above. These pads are

now available from one of the vendors on our Tech page, in the

Vendor section.

HARDWARE BASICS
WOOD TYPES

Please go to our Wood Types page to view wood options

Scroll down for options, upgrades and hardware information

Part #YUPG-1  $25

Part #YUPG-2  $25

M70 3pc. set

Example of Birch

M70 3 Piece Set Features:

  1. Standard M70 butt stock (mounting bolt not included)

  2. Accepts original M70 recoil pad

  3. Standard Yugo M70 lower hand guard

   (accepts original M70 lower rear support cap)

   (cleaning rod hole drilled)

  1. Standard Yugo M70 upper hand guard

  2. Intended for those who want to retain original

   plastic M70 pistol grip


M90 3 piece set:

  1. Same as M70 set, except comes with M90 specific

   lower hand guard. (accepts original M90 lower rear cap)

   (no cleaning rod hole, like original M90 lower)

$165 + $13 S&H

M70 Tabuk set

$205 + $13 S&H

Example of Walnut

M70 Tabuk 4 Piece Set Features:

  1. M70 Tabuk butt stock (mounting bolt included)

  2. Accepts original M70 recoil pad

  3. Standard Yugo M70 lower hand guard

    (accepts original M70 lower rear support cap)

    (cleaning rod hole drilled)

  1. Standard Yugo M70 upper hand guard

  2. Scaled down M76 Yugo pistol grip

    (We are out of the grip caps until we can find a new source)

Part # M70-T

list wood type when ordering.


This is a reproduction of the Iraqi “Tabuk” sniper stock set.

It is same as a Yugo M70 set, except for the skeletonized butt

stock.

M72 RPK set

$205 + $13 S&H

M72 RPK 4 Piece Set Features:

  1. Standard M70 butt stock (mounting bolt not included)

  2. Accepts original M70 recoil pad

  3. Standard Yugo M72 lower hand guard

    (accepts original M72 lower rear support cap)

    (cleaning rod hole drilled)

  1. Standard Yugo M72 upper hand guard

  2. Also available, upper hand guard for .308 M72

    (.308 models have carry handle, and require shorter upper)

  1. Scaled down M76 Yugo pistol grip

    (We are out of the grip caps until we can find a new source)

Part # M72-4

list wood type when

ordering.


M70 set   Part # M70-3

M90 set   Part # M90-3

list wood type when ordering.


$195 + $13 S&H

Temporary photo of M64 butt stock only. M64 set comes with std M70 type hand guards, ( same fit ), and #3 Yugo PG, as shown in 4 pc. sets listed above.

M64 4pc. set

M64 4 Piece Set Features:

  1. Standard M64 Milled 2 Tang Receiver butt stock

  2. Accepts original M70/M64 recoil pad

  3. Standard Yugo M70/M64 lower hand guard

    (accepts original M70 lower rear support cap)

    (cleaning rod hole drilled)

  1. Standard Yugo M70/M64 upper hand guard

  2. Scaled down M76 Yugo pistol grip

    (We are out of the grip caps until we can find a new source)

M64 3 piece set:

  1. Same as M64 4 pc. set, except with no pistol grip


M64 4 pc. set   Part # M64-4 ($195 + $13)   

M64 3 pc. set   Part # M64-3 ($175 + $13)

RECOIL PAD

  1. Quality commercial pad

  installed & sanded to fit

  1. Max 10” from receiver to pad end

YUGO #1PG

  1.   Reproduction of original

   M76 pistol grip

  1.   Accepts original grip cap

   & screw bushing

(M76 grip cap now available)

(Add $20 for custom made cap)

YUGO #2PG

  1.   Reproduction of original

   M76 pistol grip with no

  cap cut.

  1.   Accepts original screw

   bushing

(screw bushing included)

YUGO M70 AKM HYBRID LOWER

  1.   For Yugo Model 70 only

  2.   Combines AKM bulged shape with original

   M70 lower hand guard shape

  1.   Accepts original M70 rear support cap

  2.   Comes with cleaning rod hole drilled

  3.   Will work with folder Yugo stock

NOTE: Yugo pistol grip upgrade price only applies to 4 piece sets. Original grip screws must be used.

Yugo #1 pistol grip for customers with original M76 grips, currently have a small supply of custom made M76 grip caps, Price $20 per

Yugo #2 pistol grip for those customers wanting original M76 type grip, but do not have original grip hardware

M76 4 Piece Set Features:

  1. Standard M76 butt stock

  2. Accepts original M70/M76 recoil pad

  3. Standard Yugo M76 lower hand guard

    (accepts original M76 lower rear support cap)

  1. Standard Yugo M76 upper hand guard

  2. Scaled down M76 Yugo pistol grip

    (We are out of the grip caps until we can find a new source)

  1. Can be ordered cut for original M76 sling swivel

   or without, if to be installed on an M70 or other

   Yugo.


M76 3 piece set:

  1. Same as M76 4 pc. set, except with no pistol grip

M76 4 pc. set   Part # M76-4 ($225 + $13)   

M76 3 pc. set   Part # M76-3 ($195 + $13)

Temporary photo of M76 butt stock only. M76 set comes with std M76 type hand guards, and #3 Yugo PG, as shown in 4 pc. sets listed above.

$225 + $13 S&H

For more info on receiver types, go to:

Receiver ID page

Information regarding the PAP Serbian/Yugoslavian M70 and other PAP variants


Most PAP model AKs have an angle cut receiver. This is done to enable the mounting of the factory plastic thumbhole

stock, as most are furnished with. This angle cut basically removes the bottom section of the Yugo stock trunnion.

Because of this missing material, the once rounded rectangular pocket, where the butt stock nose or knuckle would

insert in to, now has no lower support for the front of the traditional M70 butt stock.


There is no adaptor, nor can one be made to remedy this issue. The only real way to return the PAP angle cut

receiver to it’s original form, would be to weld in the missing metal, to recreate the original rounded rectangular pocket.


Pictures at right show std. M70 receiver (top), front end of M70 butt stock, (middle), and PAP cut receiver, (bottom).

These pics should explain visually what is explained in this section.


Basically, you can still mount one of our std. M70 butt stocks, but there will be no support for the bottom front of the

stock. This means that potential, there will be as much play in the stock, as there is in the mounting bolt and

the hole running through the stock.


There is no sense in making a custom cut M70 stock, to fill in the angled section, as it will not enhance the mounting

integrity.


If you have a straight cut PAP, then there are no issues, as a std. M70 stock will fit no problem.

Some of the new Serbian PAPs have a shorter stock mounting bolt. If yours is shorter than 9”, please tell us the length

of your bolt, measured from the bottom of the bolt head to the end of the bolt.